New Holland T8010 Manual page 179

STEP 41
Apply petroleum jelly to the teflon rings.
STEP 42
Install the clutch piston into the carrier with the flat
side of the piston facing down. Push the piston into
the carrier by hand.
Section 21 - Transmission, Drivelines - Chapter 4
T95280
41-3
A10873
21-4-18
STEP 43
Install the reaction plate (thicker than separator
plate).
NOTE: The reaction plate is similar to a separator
plate except that it is thicker.
STEP 44
Install a new friction plate.
NOTE: Dip all friction plates in clean transmission
fluid.
A10875
A10876