STEP 11
Remove the two bolts that attach the linkage shield to
the hitch support C-bracket.
IMPORTANT: Be sure to remove hitch position
sensor (potentiometer) prior to removing the hitch lift
cylinders. If the cylinders are removed first, there
may be excessive travel of the rockshaft, which would
damage the sensor.
STEP 12
Remove the nut from the link assembly.
Section 35 - Hydraulic Systems, 3PT - Chapter 11
36S21
36S17
35-11-7
STEP 13
If necessary remove the three nuts from the bolts that
attach the hitch potentiometer bushing to the sensor
bracket and sensor.
NOTE: This is a subassembly and does not need to
be disassembled. See Note 2 in exploded view.
36S15