STEP 20
2
Remove the four air cleaner housing mounting nuts
(1). Remove the air cleaner assembly. Remove the
alternator wire harness (2) with the air cleaner
assembly.
STEP 21
Remove the deaeration tank to recovery bottle hose
(1) and engine to deaeration tank air bleed hose (2).
Section 10 - Engine - Chapter 1
1
RD05N112
2
1
RD05N113
STEP 22
Remove the charge-air cooler to intake manifold tube
bushing bolt (1). Remove the charge-air cooler to
intake manifold pipe clamp (2). Remove the pipe.
Discard the O-ring located at the intake manifold.
STEP 23
1
Disconnect the suspended axle position pot harness
(1) if equipped. Remove the engine ECM (Electronic
Control Module) power connector (2) and the throttle
position connector (3).
10-1-6
1
RD05N114
2
RD05N115
2
3
RD05N116