New Holland T8010 Manual page 157

STEP 7
6
1
2
1. STEERING SENSING
AND SUPPLY LINES
2. REGULATED SUPPLY
JUMPER TUBE
3. MFD/DIFF LOCK SUPPLY
LINE
D i s c o n n e c t t h e s e l i n e s f r o m t h e t o p o f t h e
transmission
STEP 8
4
1
1. ODD EVEN VALVE
RETURN LINE
2. FILTER TEMP SENDING
WIRE
Remove these lines from the hydraulic filter head.
Disconnect the filter temperature sender wire.
Move the transmission wire harness back out of the
way.
Section 21 - Transmission, Drivelines - Chapter 3
5
4
3
RD02C167
4. REGULATED PRESSURE
SUPPLY LINE
5. OIL COOLER RETURN
LINE
6. PARK LOCK RELEASE
SUPPLY LINE
3
2
RD02C169
3. OIL COOLER SUPPLY
LINE
4. STEERING RETURN LINE
STEP 9
R e m o v e t h e 1 0 b o l t s a t t a c h i n g t h e s p e e d
transmission to the range transmission and install a
guide stud on each side.
STEP 10
Move the speed and range transmissions apart a few
inches. Check to be sure no lines are connected
across the split. Push on the front wheels and
continue to move the speed and range transmissions
apart.
6
RD02C170
RD02C171