STEP 43
Install a dished disc. Position the disc so the convex
ID touched the side gear shoulder.
STEP 44
Apply friction modifier (B91246) to all the discs and
plate friction surfaces.
NOTE: Make sure the discs and plates are kept in
the same order as disassembly.
Section 25 - Four-Wheel Drive Front Axle - Chapter 8
RR99K233
RR99K231
STEP 45
Be sure the plates are arranged for installation as
follows:
3 Plates (in board side)
1 Discs
1 Plate
1 Disc
1 Plate
1 Disc
1 Plate
1 Disc
1 Plate
1 Disc
25-8-13
RI03B005