Parameter Menu - Lenze SCL series Installation And Operaion Manual

14

PARAMETER MENU

NO. PARAMETER NAME
01 LINE VOLTAGE
02 CARRIER FREQUENCY
03 START METHOD
04 STOP METHOD
STANDARD SPEED
05
SOURCE
06 RELAY OUTPUT
TB-13A FUNCTION
10
SELECT
TB-13B FUNCTION
11
SELECT
SM01M
RANGE OF ADJUSTMENT
HIGH (01), LOW (02)
4kHz (01), 6 kHz (02), 8 kHz (03), 10 kHz (04)
NORMAL (01), START ON POWER UP (02),
START WITH DC BRAKE (03),
AUTO RESTART WITH DC BRAKE (04),
FLYING RESTART 1 (05),
FLYING RESTART 2 (06),
FLYING RESTART 3 (07)
COAST (01), COAST WITH DC BRAKE (02),
RAMP (03), RAMP WITH DC BRAKE (04)
KEYPAD (01), PRESET #1 (02),
0-10 VDC (03), 4-20 mA (04)
NONE (01), RUN (02), FAULT (03),
INVERSE FAULT (04), FAULT LOCKOUT (05),
AT SET SPEED (06), ABOVE PRESET #3 (07),
CURRENT LIMIT (08), AUTO SPEED (09),
REVERSE (10)
NONE (01), 0-10 VDC (02), 4-20 mA (03),
PRESET SPEED #1 (04),
START FORWARD (05),RUN REVERSE (06),
START REVERSE (07),
EXTERNAL FAULT (08),
INVERSE EXT FAULT (09),
AUXILIARY STOP (10),
ACCEL/DECEL #2 (11)
NONE (01), 0-10 VDC (02), 4-20 mA (03),
PRESET SPEED #2 (04), DECREASE FREQ (05),
START FORWARD (06), JOG FORWARD (07),
JOG REVERSE (08), EXTERNAL FAULT (09),
INVERSE EXT FAULT (10), AUX. STOP (11),
ACCEL/DECEL #2 (12), REMOTE KEYPAD (13)
28
FACTORY
DEFAULT
HIGH (01)
6 kHz (02)
NORMAL (01)
COAST (01)
KEYPAD (01)
NONE (01)
NONE (01)
NONE (01)