Avaya S8700 Maintenance Manual page 674

Maintenance Commands
For the following output example, assume that only one alarm was in the alarm
log and it is on the board in cabinet 1, carrier c, slot 7. The command that was
entered was "test alarms" and the query form was left empty by just pressing
.
ENTER
test alarms
Port Maintenance On
Name
01C03 UDS1-BD
Port Maintenance Name
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
01C03 UDS1-BD
Testing completed for this object.
Feature Interactions
With the enhancement of multiple maintenance users, there may be a possibility
of two users attempting to test the same physical hardware (e.g., one via the test
alarms command and another through the test board command). If this command
should attempt to test a board that is currently being tested by another user, a
error message is displayed.
7-418 Issue 1 May 2002
ALARM ENTRY
Alt Alarm Svc
Brd? Name Type State
n WARNING
TEST RESULTS
Alt. Name Test No.
138
139
140
141
142
143
144
145
146
Ack? Date
1 2 Alarmed
03/06/16:48 1/4
Result Error Code
NO BOARD
NO BOARD
NO BOARD
NO BOARD
NO BOARD
NO BOARD
NO BOARD
NO BOARD
NO BOARD
Page 1
Alarm
Count
555-233-143