Chapter 7: Replacing The Dialogic Board; Configuring A Dialogic Analog Port Board; Dialogic Port Board Settings; Settings For D41Jctlsew 4-Port Analog Board - Avaya S8800 Maintaining

Chapter 7: Replacing the Dialogic board

Configuring a Dialogic analog port board

About this task
Avaya Message Networking system supports the following Dialogic analog port boards, one board
per system:
• D120JCTLSEW 12-port analog board. Use the
page 39 as a reference when configuring the port board.
• D41JCTLSEW 4-port analog board. Use the
page 37 as a reference when configuring the port board.
To set the jumpers and switches for a new or replacement analog board, use the appropriate
following instructions:
Procedure
1. Settings for D41JCTLSEW 4–port analog board
2. Settings for D120JCTLSEW 12-port analog boards
Important:
If you are replacing a 4-port analog port board with a 12-port board, contact the Avaya
technical support.
For information on how to remove or replace the dialogic board, see
card on page 30

Dialogic port board settings

Settings for D41JCTLSEW 4–port analog board
About this task
To set the jumpers and switches for a new or replacement D41JCTLSEW 4–port analog board in
the S8800 2U server:
Maintaining the Avaya S8800 2U Server for Message Networking
36
D120JCTLSEW analog port board diagram
D41JCTLSEW analog port board diagram
on page 36
Comments? infodev@avaya.com
on page 38
Removing a PCIe
on
on
May 2014