Ip Nat - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip nat

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip nat { inside | outside }
Command introduced before JunosE Release 7.1.0.
Marks interfaces that participate in NAT translation as residing on the inside or the outside
network. The no version unmarks the interface so that it does not participate in NAT
translation.
inside—Specifies that the interface resides on the inside (private) portion of the network.
The inside portion of the network uses nonroutable IP addresses.
outside—Specifies that the interface resides on the outside (public) portion of the
network. The outside portion of the network (for example, the Internet) uses routable
legitimate addresses.
Interface Configuration, Profile Configuration
Chapter 10: I Commands
865