Ipsec Local-Endpoint - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipsec local-endpoint

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ipsec local-endpoint ipAddress transport-virtual-router transportVRName
Command introduced before JunosE Release 7.1.0.
Defines a default local endpoint used for ISAKMP/IKE negotiations and all IPSec tunnels
for a transport virtual router. The no version restores the default settings of the local
endpoint.
ipAddress—IP address to use as the local endpoint
transportVRName—Name of transport virtual router in which the IP address is defined
Global Configuration
Chapter 10: I Commands
1001