L2Tp Unlock-Test Destination - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2tp unlock-test destination

Syntax
Release Information
Description
Options
Mode
1192
l2tp unlock-test destination { destinationName |
[ virtual-router vrName ] ip ipAddress }
Command introduced in JunosE Release 7.2.0.
Forces L2TP to disregard any remaining lockout time and immediately begin the lockout
test procedure for the specified destination. If lockout testing is not enabled, this command
immediately unlocks the destination. There is no no version.
destinationName—Name of the L2TP destination
vrName—Name of the virtual router on which the destination exists
ipAddress—IP address of the destination
Privileged Exec (at privilege level 10 or higher)
Copyright © 2010, Juniper Networks, Inc.