Ip Initial-Sequence-Preference - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip initial-sequence-preference

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip initial-sequence-preference preference
no ip initial-sequence-preference
Command introduced in JunosE Release 8.1.0.
Configures the warm restart replay preference for an IP interface after a high availability
switchover. The no version restores the default value.
preference—Preference value, 0 or 1; 1 indicates highest preference; default value is 0
Subinterface Configuration
Chapter 10: I Commands
837