Minimum-Links - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

minimum-links

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1314
minimum-links minimumLinkValue
no minimum-links
Command introduced in JunosE Release 10.0.0.
Configures the minimum number of member links in the link aggregation group (LAG)
bundle that must be in the Collecting/Distributing state for the LAG interface to be
considered up. The no version resets the minimum number of member links to the default
value.
minimumLinkValue—Minimum number of links in the LAG bundle in the range 1-8 (8 is
the maximum number of member links per LAG bundle); default value is 1.
Interface Configuration
Configuring 802.3ad Link Aggregation and Link Redundancy in the JunosE Link Layer
Configuration Guide
Copyright © 2010, Juniper Networks, Inc.