Mpls Bandwidth - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls bandwidth

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
{ ip rsvp | mpls } bandwidth bandwidth
no { ip rsvp | mpls } bandwidth
Command introduced before JunosE Release 7.1.0.
Specifies the total bandwidth reservable for MPLS on the interface. The no version
restores the default value, 0.
ip rsvp—Specifies keyword for compatibility with non–E Series implementations of
MPLS
mpls—Specifies JunosE MPLS implementation
bandwidth—Reservable bandwidth in kilobits per second, a value in the range
1–10000000
Interface Configuration
Chapter 13: M Commands
1335