Invert Data - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

invert data

Syntax
Release Information
Description
Mode
728
[ no ] invert data
Command introduced before JunosE Release 7.1.0.
Enables data stream inversion. Data stream inversion must be turned on by network
personnel at the other end of the line. The no version disables data stream inversion.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.