L2Tp Drain Tunnel - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

l2tp drain tunnel

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] l2tp drain tunnel { destinationName |
[ virtual-router vrName ] ip ipAddress tunnelName }
Command introduced before JunosE Release 7.1.0.
Prevents the assignment of new sessions to a tunnel. This command works in conjunction
with the l2tp shutdown tunnel command. Both commands affect the status of the
administrative state of L2TP for the tunnel; the l2tp drain tunnel command sets the
administrative state to drain. The no version allows the assignment of new sessions to
a tunnel.
destinationName—Name the router assigns to the LNS
vrName—Name of the virtual router on which the tunnel exists
ipAddress—IP address of the LNS
tunnelName—Name of the tunnel
Global Configuration
Chapter 12: L Commands
1169