Metric-Style Narrow - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

Software for e series broadband services routers command reference a to m
Table of Contents

Advertisement

JunosE 11.3.x Command Reference Guide A to M

metric-style narrow

Syntax
Release Information
Description
Options
Mode
1310
[ no ] metric-style narrow [ transition ] [ level-1 | level-2 | level-1-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the router to generate and accept only old-style IS-IS TLVs with narrow
(six-bit) metric fields. If you issue this command, the value configured with the isis metric
command can range only from 0–63. The no version restores the default value, which
is to generate and accept only old-style TLVs with narrow (six-bit) metric fields.
transition—Configures the router to additionally accept new-style TLVs with wider
metric fields
level-1—Configuration applies only to level 1 routing
level-2—Configuration applies only to level 2 routing
level-1-2—Configuration applies to both level 1 and level 2 routing
Router Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents