Mpls Ldp Independent-Control - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls ldp independent-control

Syntax
Release Information
Description
Mode
1358
[ no ] mpls ldp independent-control
Command introduced in JunosE Release 8.1.0.
Specifies independent control as the method used by LDP for label distribution. This
command takes effect immediately. The no version restores the default method, ordered
control.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.