Mdt-Data-Delay - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mdt-data-delay

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mdt-data-delay timeout
no mdt-data-delay
Command introduced in JunosE Release 8.2.0.
Configures a timeout before switching to data MDT. The no version returns to the default.
timeout—Timeout value measured in 0.1 seconds in the range 1-255 seconds; the default
is 30
IP PIM Data MDT Configuration
Chapter 13: M Commands
1299