Ipv6 Address-Pool Local - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 address-pool local

Syntax
Release Information
Description
Mode
1012
[ no ] ipv6 address-pool local
Command introduced in JunosE Release 10.1.0.
Enables the IPv6 local address pool functionality to allow configuration of IPv6 local
address pools to assign prefixes to DHCPv6 clients. The no version disables the IPv6
local address functionality.
NOTE: If you attempt to configure an IPv6 local address pool without enabling
the IPv6 local pool feature, an error message is displayed.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.