Member-Interface-Type - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

member-interface-type

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1306
member-interface-type {vlan | atm-vc | ip}
no member-interface-type
Command introduced in JunosE Release 9.2.0.
Configures the member-interface type for a QoS interface set. The no version removes
the member-interface type from the parameter definition.
vlan—Specifies the member-interface-type as VLAN
atm–vc—Specifies the member-interface-type as VLAN
ip—Specifies the member-interface-type as VLAN
QoS Interface Set Configuration
Configuring Interface Sets for QoS
Copyright © 2010, Juniper Networks, Inc.