L2Tp Shutdown Session - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

l2tp shutdown session

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] l2tp shutdown session { destinationName |
[ virtual-router vrName ] ip ipAddress sessionName }
Command introduced before JunosE Release 7.1.0.
Closes a specific session. The no version has no effect because all L2TP sessions are
dynamic and cannot be restarted after they have been shut down.
destinationName—Name that the router assigns to the LNS
vrName—Name of the virtual router on which the destination exists
ipAddress—IP address of the LNS
sessionName—Name of the session
Global Configuration
Chapter 12: L Commands
1183