Maximum-Voql - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

maximum-voql

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
maximum-voql maximumVoqlValue
no maximum-voql
Command introduced in JunosE Release 8.0.0.
Specifies a maximum value for the virtual output queue length (VOQL) for all simple
shared shapers on the router. The VOQL tracks the amount of data over queued between
simple shared-shaper rate periods. The no version removes the specified maximum VOQL
value from all simple shared shapers on the router.
maximumVoqlValue—Maximum value for the VOQL in the range 0–10000; default
value is 4000
QoS Shared Shaper Control Configuration
Configuring Simple Shared Shaper Algorithm Variables
Chapter 13: M Commands
1291