Ipv6 Ospf Dead-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipv6 ospf dead-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipv6 ospf [ processId ] dead-interval deadInterval
no ipv6 ospf [ processId ] dead-interval
Command introduced before JunosE Release 7.1.0.
Sets the time period during which the router's neighbors do not see hello packets before
they declare the router to be down. The no version resets the dead interval to its default.
processId—Integer in the range 1–65535
deadInterval—Number in the range 0–2147483647 seconds; default value is 40 seconds
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
1077