Mpls Ldp Graceful-Restart Reconnect-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls ldp graceful-restart reconnect-time

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls ldp graceful-restart reconnect-time [ seconds ]
no mpls ldp graceful-restart reconnect-time
Command introduced in JunosE Release 7.1.0.
Specifies the length of time you want neighbors to wait for the gracefully restarting router
to resume sending LDP messages to neighbors after the restart. The no version restores
the default value, 140 seconds.
seconds—Number of seconds in the range 60–300
Global Configuration
Chapter 13: M Commands
1353