configure
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
configure [ terminal | file [ fileName ] [ verbose | show-progress [ dotPeriod ] ] ]
Command introduced before JunosE Release 7.1.0.
Enters Global Configuration mode. There is no no version.
NOTE: This command is not allowed for a short time after a warm restart
(warm switchover) occurs. This behavior allows some applications time to
complete their warm-restart initialization. However, if the warm-restart does
not complete in 5 minutes, the warm-start is cancelled and configuration
access is restored.
terminal—Enables manual configuration from a terminal
file—Configures the router from a script file
fileName—Script file to execute
verbose—Echoes each command as the script is executed
show-progress—Displays a '.' during script execution
dotPeriod—Number of commands executed before a '.' is displayed; default value is
100
Privileged Exec
Chapter 4: C Commands
447