L2C Max-Branches - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

l2c max-branches

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] l2c max-branches maxBranches
Command introduced before JunosE Release 7.1.0.
Specifies the maximum number of branches the ANCP end user can have. The no version
returns the maximum number of branches to its default value (unlimited branches).
maxBranches—Maximum number of branches allowed for the ANCP end user in the
range 1–64000
Interface Configuration, Subinterface Configuration
Chapter 12: L Commands
1149