L2Tp Policy-Parameter Hierarchical - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2tp policy-parameter hierarchical

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1176
l2tp policy-parameter hierarchical parameterName { nodeValue | atm | atm-vc | atm-vp
vpValue | ethernet | fr-vc | forwarding | svlan svlanValue | vlan }
no policy-parameter parameterName
Command introduced in JunosE Release 8.0.0.
Specifies a parameter value for L2TP interfaces. The no version removes the policy
parameter and its contents.
parameterName—Name of policy parameter
nodeValue— Aggregation node number in the range 1–65535
vpValue—ATM VPI number in the range 0–255
svlanValue—SVLAN ID number in the range 0–4095
Interface Configuration
Creating a Classifier Group for a Policy List
Copyright © 2010, Juniper Networks, Inc.