Mpls Atm Vci Range - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls atm vci range

Syntax
Release Information
Description
Options
Mode
1332
mpls atm vci range minVCI maxVCI
no mpls atm vci range
Command introduced before JunosE Release 7.1.0.
Specifies the range for virtual circuit identifiers that can be used in MPLS labels for an
MPLS major interface on an ATM AAL5 interface using the interface label space. Creates
the MPLS major interface if it does not yet exist. An error message is generated if you
issue the command for any other layer 2 interface, as they do not support the interface
label space. The no version deletes the range.
minVCI—Lowest virtual circuit identifier acceptable for a label, a value from 33–65535
maxVCI—Highest virtual circuit identifier acceptable for a label, a value from 33–65535
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.