Log Destination Syslog Source - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

log destination syslog source

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
log destination syslog ipAddress source interfaceType interfaceSpecifier
no log destination syslog ipAddress source [ interfaceType interfaceSpecifier ]
Command introduced before JunosE Release 7.1.0.
Specifies a source interface type and location for events logged to a system log server.
Overrides the type and location of the actual source to enable server access behind
firewalls. The no version restores the default state, which is to use the actual interface
type and location of the source.
ipAddress—IP address of the system log application
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Chapter 12: L Commands
1237