Table of Contents
Advertisement
l2vpn site-range
Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
l2vpn l2VpnName site-range siteRange
no l2vpn l2VpnName site-range
Command introduced in JunosE Release 8.1.0.
Configures the maximum number of customer sites that can participate in the specified
VPWS L2VPN. In a VPWS L2VPN configuration, each customer site is represented by a
customer edge (CE) device located at the edge of the customer's network. The no version
restores the default site range, 1.
l2VpnName—Name of the VPWS instance
siteRange—Maximum number of sites that can participate in the VPWS domain, in the
range 1–65535; default value is 1
Global Configuration
Configuring an L2VPN Instance in the JunosE BGP and MPLS Configuration Guide
Chapter 12: L Commands
1201
Advertisement
Table of Contents
