External-Paths - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

external-paths

Syntax
Release Information
Description
Options
Mode
618
external-paths limit
no external-paths
Command introduced in JunosE Release 8.2.0.
Configures the maximum number of received external BGP best paths allowed for
route-target signaling. The no version restores the default value, 1.
limit—Number of paths, in the range 1–255
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.