Table of Contents
Advertisement
copy running-configuration startup-configuration
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
copy running-configuration startup-configuration
Command introduced before JunosE Release 7.1.0.
Saves all outstanding (unsaved) configuration changes to nonvolatile storage; an exact
alias of the write memory command. Available if the router is in either Automatic Commit
mode or Manual Commit mode. If you issue this command from Automatic Commit
mode, the CLI notifies you that the command is not necessary, but allows you to proceed.
This command is prevented during the high availability initialization state. If the command
is issued during this state, the CLI notifies you of the state and requests that you try again
later. There is no no version.
Privileged Exec
Chapter 4: C Commands
463
Advertisement
Table of Contents
