JunosE 11.3.x Command Reference Guide A to M
ip rsvp bandwidth
Syntax
Release Information
Description
Mode
934
{ ip rsvp | mpls } bandwidth bandwidth
no { ip rsvp | mpls } bandwidth
Command introduced before JunosE Release 7.1.0.
Specifies the total bandwidth reservable on the interface in a non–E Series
implementation. See the mpls bandwidth command for a complete description and
syntax.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?