L2Vpn Site-Name Site-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2vpn site-name site-id

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1200
[ no ] l2vpn l2VpnName site-name siteName site-id siteId
[ multi-homed priority priority ]
Command introduced in JunosE Release 8.1.0.
multi-homed priority keywords and priority variable added in JunosE Release 9.3.0.
Configures a name and a unique site identifier for a customer site that belongs to the
specified VPWS instance. Optionally configures the site to be multihomed. In a VPWS
configuration, each customer site is represented by one or more customer edge (CE)
devices located at the edge of the customer's network. The no version removes the site
name and site identifier from the VPWS instance, or removes the multihomed
configuration for the customer site and returns it to a single-homed state.
l2VpnName—Name of the VPWS instance
siteName—Name of the site; string of up to 128 alphanumeric characters
siteId—Numerical identifier for the site, in the range 1–65535; must be unique across
the VPWS domain
priority—Number that sets the priority of this VPWS instance for a multi-homed site,
in the range 1–65535; priority is sent in BGP advertisements as the Local-Preference
attribute and determines whether the router hosting the VPWS instance becomes the
designated VE router for this multihomed site
Global Configuration
Configuring an L2VPN Instance in the JunosE BGP and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.