JunosE 11.3.x Command Reference Guide A to M
mtrace
Syntax
Release Information
Description
Options
Mode
1432
mtrace sourceAddress [ destinationAddress [ groupAddress [ responseAddress ] ] ]
[ maxHops ] [ detailed ]
Command introduced before JunosE Release 7.1.0.
Discovers the routes that multicast packets follow when travelling to their destinations.
There is no no version.
sourceAddress—DNS name or unicast IP address of the multicast-capable device at
the beginning of the path.
destinationAddress—DNS name or unicast address of the device at the end of the path.
The default destination is the router from which you type the command.
groupAddress—DNS name or multicast address of the group for which you want to
trace routes. The default address is 224.2.0.1 (the group used for MBONE Audio).
responseAddress—IP address that receives the results of the trace
maxHops—Maximum number of hops allowed for the trace; default value is 64.
detailed—Provides a detailed description of the trace, rather than a summary
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?