Ip Ospf Authentication-Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip ospf authentication-key

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ospf authentication-key authKey
no ip ospf authentication-key
Command introduced before JunosE Release 7.1.0.
Assigns a password used by neighboring routers that are using OSPF simple password
authentication. The no version deletes the password.
authKey—Password; string of up to 8 characters
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
875