Mpls Ldp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls ldp

Syntax
Release Information
Description
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] mpls ldp
Command introduced in JunosE Release 7.1.0.
Enables LDP and topology-driven LSP, as does any LDP-related command, using an
implicit default profile. You cannot enable LDP and topology-driven LSPs on a loopback
interface. The no version disables LDP globally or on the interface.
Global Configuration, Interface Configuration, Subinterface Configuration
Configuring MPLS LSPs for L2VPNs and Configuring MPLS LSPs for VPLS in the JunosE
BGP and MPLS Configuration Guide
Chapter 13: M Commands
1345