Link Failover Arp-Flush - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

link failover arp-flush

Syntax
Release Information
Description
Mode
1220
[ no ] link failover arp-flush
Command introduced in JunosE Release 10.3.0.
Clears the ARP cache on an interface with redundant ports when the primary link fails.
The no version maintains the ARP entries on the interface.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.