Ip Rip Authentication Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip rip authentication key

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip rip authentication key [ 0 | 8 ] authkey
no ip rip authentication key
Command introduced before JunosE Release 7.1.0.
Specifies the password for text authentication and the key for MD5 authentication. The
no version clears the key for the interface. Supported only in RIP version 2. Authentication
is disabled by default.
0—Indicates the authKey is entered in unencrypted form (plaintext); this is the default
option
8—Indicates the authKey is entered in encrypted form (ciphertext)
authkey—Password sent with RIP messages or the key used to encrypt/decrypt RIP
messages, depending on the authentication mode set for this interface
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
917