Mpls Traffic-Eng Link-Management Timers Periodic-Flooding - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls traffic-eng link-management timers periodic-flooding

Syntax
Release Information
Description
Options
Mode
1424
mpls traffic-eng link-management timers periodic-flooding frequency
no mpls traffic-eng link-management timers periodic-flooding
Command introduced before JunosE Release 7.1.0.
Specifies the interval at which bandwidth values are flooded to the entire network.
Configuring a value of 0 turns off flooding. The no version restores the default value, 180.
frequency—Interval in seconds, a value in the range 0–3600
Global Configuration
Copyright © 2010, Juniper Networks, Inc.