Filter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

filter

Syntax
Release Information
Description
Mode
Related
Documentation
624
[ no ] [ suspend ] filter
Command introduced before JunosE Release 7.1.0.
Defines a policy rule that drops all packets conforming to the current classifier control
list and can be used while the policy list is referenced by interfaces. The no version removes
the filter rule from the policy list; the suspend version temporarily suspends the policy
rule; the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the
filter command, which may be removed completely in a future release.
Classifier Group Configuration
Policy Rule Precedence
Copyright © 2010, Juniper Networks, Inc.