Mpls Rsvp Egress-Label - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls rsvp egress-label

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls { rsvp | traffic-eng } egress-label { non-null | explicit-null }
no mpls { rsvp | traffic-eng } egress-label
Command introduced in JunosE Release 7.3.0.
Specifies that the egress router advertises the explicit null label or a non-null (real) label
by means of RSVP-TE. This advertisement ensures that packets received from upstream
include a label and that the egress router performs ultimate hop popping. The no version
restores the default condition, where the egress router advertises the implicit null label
for all tunnels (except those requiring PHB) that terminate on the router.
rsvp—Specifies JunosE implementation
traffic-eng—Specifies keyword for compatibility with non–E Series implementations
non-null—Advertises a real label, signaling that the egress router pops the last label
and performs the IP lookup; this behavior was the default before this release
explicit-null—Advertises the explicit null label, signaling that the egress router pops
the last label and performs the IP lookup
Global Configuration
Chapter 13: M Commands
1401