Mpls Ldp Deaggregate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls ldp deaggregate

Syntax
Release Information
Description
Mode
1348
[ no ] mpls ldp deaggregate
Command introduced in JunosE Release 8.1.0.
Configures LDP to bind each prefix to a separate label on the current virtual router. The
no version enables LDP to aggregate multiple prefixes to be bound to the same label.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.