Mdt-Data-Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mdt-data-timeout

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mdt-data-timeout timeout
no mdt-data-timeout
Command introduced in JunosE Release 8.2.0.
Configures the time in seconds before leaving the data MDT group. The no version returns
to the default.
timeout—Time before leaving the data MDT group, in the range 1–1200 seconds; the
default is 180
IP PIM Data MDT Configuration
Chapter 13: M Commands
1301