Mpls Ldp Egress-Label - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls ldp egress-label

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls ldp egress-label { explicit-null | non-null }
no mpls ldp egress-label
Command introduced in JunosE Release 8.1.0.
Configures LDP to advertise the explicit null label (label 0) or a non-null label for the
LSR that is the egress router for the prefix. This command takes effect immediately. The
no version restores the default, where the egress router advertises the implicit null label
(label 3), which causes the router's upstream neighbor to perform a penultimate hop
pop.
Global Configuration
Chapter 13: M Commands
1351