Masked-Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

masked-key

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
masked-key encryptedKey
Command introduced before JunosE Release 7.1.0.
Specifies the encrypted form of the preshared key that the router uses in IKE negotiations.
Once you enter a preshared key, the router encrypts the key and displays it in masked
form to increase the security of the key. If you need to reenter the key, you can enter it in
its masked form using this command. There is no no version. To delete a key, use the no
version of the ipsec key manual command.
encryptedKey—Encrypted key value; to obtain this value, enter the unencrypted key
using the key command in IPSec Manual Key Configuration mode, and then display
the masked version of the key with the show configuration command
IPSec Manual Key Configuration
Chapter 13: M Commands
1267