Mdt-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mdt-interval

Syntax
Release Information
Description
Options
Mode
1302
mdt-interval time
no mdt-interval
Command introduced in JunosE Release 8.2.0.
Configures the time in seconds between successive MLD join TLVs. The no version returns
to the default.
time—Time between successive MLD join TLV in the range 1–300 seconds; the default
is 60
IP PIM Data MDT Configuration
Copyright © 2010, Juniper Networks, Inc.