Full-Spf-Always - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

full-spf-always

Syntax
Release Information
Description
Mode
656
[ no ] full-spf-always
Command introduced before JunosE Release 7.1.0.
Enables full SPF calculations for ISIS network changes. The no version restores partial
route calculation (PRC) mode for SPF calculations.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.