E3-Scramble - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

e3-scramble

Syntax
Release Information
Description
Mode
552
[ no ] e3-scramble
Command introduced before JunosE Release 7.1.0.
Enables scrambling of the ATM cell payload on an E3 interface. E3 scrambling assists
clock recovery on the receiving end of the interface. The no version disables scrambling.
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.